Table of Content
- 1. Club Car DS Carryall 6″ Lift Kit
- 2. 3G Deluxe Lift Kit Combo with 12″ Magnum
- 3. 10L0L Golf Cart Rear Heavy Duty 4-Leaf Springs Kit
- 4. Madjax 6″ 2004-14 A-Arm Lift Complete Kit for Club Car Precedent
- 5. GTW 6″ Double A-Arm Golf Cart Lift Kit for Club Car DS Gas/Electric
- FAQs – Club Car Lift Kits:
- How Much Does It Cost to Lift a Club Car Golf Cart?
- How Do You Put a Lift Kit on A Club Car DS?
- How Do You Tell the Year of a Club Car Golf Cart?
- Lifting a Club Car Cart for More Off-Road Possibilities
Lift kits are one of the most popular mods for golf carts. It improves ground clearance, allowing the cart to drive over difficult terrain with ease.
It increases the functionality of your cart from just being a golf cart that can only traverse golf courses, to an ATV which can be used for many different purposes such as hunting or off-roading.
Lift kits of all types are abundantly available online. But not all of them are worth your hard-earned money. In this guide, we have gathered some of the best quality Club Car golf cart lift kits that will be a good upgrade for your current model.
1. Club Car DS Carryall 6″ Lift Kit
It is one of the most popular options if you are looking for a 6-inch spindle lift for your Club Car Carryall and DS that was manufactured after 1981.
It is manufactured by a company called Jake’s right here in the US, and it costs under $400.
This kit replaces your existing spindle and lifts the body.
Once the cart is lifted, you will be able to easily fit 23” tires which will further increase your ground clearance.
It is cast out of ductile iron, which makes it almost three times stronger than any of the kits made out of gray iron.
The casted construction adds further strength to the spindle compared to welded kits.
Thankfully, If you follow the instructions supplied with the kit, installation is simple.
The kit will just bolt-on, and none of the steps require you to cut or weld any component of the kit or the cart.
You will reuse all of the suspension components in the front. The raised spindle will easily bolt onto the existing suspension setup.
This kit eliminates the need for the rear sway bar, so that will not be required once it is assembled.
A six-inch kit like this is more expensive and is definitely classed as a premium accessory for your Club Car golf cart.
It will allow you to traverse a variety of different terrains however with relative ease.
If you also add some all-terrain tires into the mix, you will be able to take your cart off-road without the fear of ever getting stuck.
The bigger tires will also make it a bit faster on the streets and give it a rugged look.
It is the perfect kit for you if you are looking for an affordable premium quality lift kit that can take some abuse and is easy to install.
2. 3G Deluxe Lift Kit Combo with 12″ Magnum
This kit includes a 6-inch A-Arm lift kit, as well as four 12-inch Magnum wheels and 23” tires that are already mounted on the wheels.
The lift kit is manufactured by 3G, which is a well-reputed brand among the golfing cart community.
Their vehicle and auto products are known for their quality and reliability and this golf cart lift kit would be a solid choice if you wanted a reliable accessory that offers good value when you consider the package includes a full set of new tires.
It is a decent fit for electric models of Club Car DS produced between 1984 and 2003 and gas models produced between 1997 and 2003.
The gas-powered models produced between 1984 and 1996 however, will require new rear shocks to fit this kit.
The A-Arm suspension setup is perfect for rough terrains as it provides increased travel for the shocks.
It also allows for camber and toe adjustments for the wheel, to obtain the perfect alignment.
This kit replaces your entire stock suspension setup at the front because the 23” tires are 10.5” wide all-terrain tires, which will exponentially increase the capability of your cart.
The A-Arm suspension setup will improve the ride quality and the handling of the cart on the road as well.
This kit will be ideal for those who are looking for a budget-friendly A-Arm suspension setup and are also planning to upgrade the wheels and tires at the same time.
It provides the whole package, so you would not have to spend hours searching for each component.
3. 10L0L Golf Cart Rear Heavy Duty 4-Leaf Springs Kit
The 10LOLIt is not strictly a lift kit but a replacement for the rear leaf springs in the Club Car DS produced after 1981.
These leaf springs are designed to handle much heavier loads than the stock springs were ever intended to.
The carbon steel leaf springs are thicker than the stock ones and are designed to handle the extra load.
Installing the heavy-duty leaf springs might raise the rear by ¼ – ½ inches and If the cart is loaded, it should not have a negative effect on ride quality.
The suspension has a robust build quality, and it is coated with an anti-rust coating, so we expect it to last a long time.
You will not have to use the factory shock if you install this kit, but if you want to use it, you will have to purchase shock extenders.
If you follow the directions supplied, it is quite simple to set up and fit to your golf car.
This rear suspension upgrade is necessary if you have installed aftermarket rear seats or carry heavy loads.
If you continue to use the stock suspension with passengers or heavy objects at the back, you will find that the cart bottoms out at even the most minor bumps.
It costs only about $100, and it is worth it if you need the stronger setup at the rear.
4. Madjax 6″ 2004-14 A-Arm Lift Complete Kit for Club Car Precedent
The Madjax formed steel A-Arm lift kit is designed specifically for the gas as well as electric powered Club Car Precedent carts manufactured between 2004 and 2014.
It is priced at around $450 and uses durable urethane bushings and is coated in a durable high gloss powder coat finish.
It offers enough clearance to fit up to 23” tires. Thus, the suspension’s travel is increased, making it simpler to drive over uneven terrain.
It also allows the user to adjust the camber and the toe making it easier to dial in the required alignment.
It has oversized ⅝” Heim joints allowing for a longer shock travel, and it has got debris louvers to protect the suspension components.
Some components are simple to put together, while others might require the assistance of a mechanical cart expert.
This kit is for those who own a Club Car Precedent from the mentioned period, who wish to buy a premium lift kit to increase its off-road capability.
A-Arm kits are not the cheapest or easiest to install, but they improve the ride quality, increase stability and increase suspension travel.
5. GTW 6″ Double A-Arm Golf Cart Lift Kit for Club Car DS Gas/Electric
The GTW 6 inch lift kit is a bit more affordable coming in at under $400.
But the low cost does not mean that it is a low-quality product – GTW is well known for its reliable products and this kit gets good all-round reviews.
GTW uses the latest innovations in manufacturing these products.
It is suitable for electric power Club Car DS carts manufactured between 1982 and 2003.5 and for gas-powered carts manufactured between 1997 and 2003.5.
Installation is fairly straightforward with the provided instruction manual.
It’s safe to use and doesn’t require any cutting or welding, but professional help is recommended for installation.
After installing the kit, it will be able to easily accommodate 23” tires without any clearance issues.
It allows for easy camber and toe adjustments which provides a much better ride and handling than a spindle lift both on and off-road.
FAQs – Club Car Lift Kits:
Read the FAQs below on additional information that might be of use when deciding on a lift kit for your Club Car golf cart.
How Much Does It Cost to Lift a Club Car Golf Cart?
The cost of lifting a cart on a Club Car model will mostly depend on the type of lift that you are planning to equip. A good-quality spindle lift kit can cost around $250 if you are buying from a recognized brand.
An A-Arm lift kit can cost around $400, and there are many more types of lift kits, such as long-travel suspension, which can cost upwards of $1000.
So the cost will depend on the lift kit that you buy.
Also, if you are employing a professional to install the kit for you, they can charge about $75 an hour.
Installing can take several hours, so if you can install it yourself, you can save a lot of money while lifting your cart.
How Do You Put a Lift Kit on A Club Car DS?
Nearly all Club Car lift kits can be installed with a few basic tools and a bit of elbow grease. You will need to jack up the cart and use jack stands to lift it off the ground, this will enable you to work under the cart to replace the suspension components.
You will also need wrenches and screwdrivers of the correct size.
Follow the user manual provided along with the lift kit to get instructions and tips specific to your cart.
Make sure to properly organize each part as you remove them so that you can replace the needed components without any confusion.
How Do You Tell the Year of a Club Car Golf Cart?
Since 1981, Club Car has printed the serial number under the glove box on the passenger side. The first two numbers indicate the last two digits of the year of manufacture. If the Club Car cart is older than 1981, you can find the serial number by locating the aluminum beam under the seat.
It is on the driver’s side frame section of the cart.
Lifting a Club Car Cart for More Off-Road Possibilities
Anyone who owns a lifted cart will tell you that the lift kit is their most valuable golf cart improvement.
Our Club Car golf cart lift kits reviews write-up demonstrates that you can DIY the whole process by following the instructions included.
A lifted golf cart opens the door to a whole lot of activities such as hunting, camping, and off-roading which were previously out of bounds.
But it is quite an expensive upgrade, so you will have to choose wisely, and hopefully, our reviews can point you in the right direction.